PHA-1-R2 Amplifier

The PHA-1 amplifier is ideal as a low noise high dynamic range amplifier between 70MHz and 2GHz, or as a transmit driver amplifier producing up to +21dBm. The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier. Please refer to the PHA-1 Data Sheet for further information.

This Product is only available as a built and tested module or in an enclosure and is not available as a Kit. Products include a 2.1mm DC power cable. Please refer to the Options Tab for the descriptions of the various products available.

Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in a few days.

PHA-1M-R2-B Is a fully constructed and tested Wide band PC board Amplifier for 70MHz to 2GHz with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable

PHA-1M-R2-ENC Is a fully constructed Wide band amplifier in a extruded aluminium enclosure for 70MHz to 2GHz with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable

Specifications
Frequency Range:	PHA-1M 70MHz to 2GHz
Gain Typically:	13dB @ 70MHz, 16dB @ 430MHz, 14dB @ 1.3GHz
Noise Figure:	1.7dB @ 100MHz, 1.9dB @ 1GHz
OpIP3:	+41m @ 1GHz
Output Power:	+21dBm from 70MHz to 2GHz
Operating Voltage:	+ 7 to 15vdc ( +12vdc @ 110mA Recommended )
Board Size:	37mm L x 41mm W x 15mm H ( Does not inc SMA length )
Enclosure Size:	43mm L x 44mm W x 23.3mm H ( Does not inc SMA length )

Kits are available to ship to most countries. Built Products are only available for Australia and New Zealand Only, and are Not available for Export to other countries.

Please Note: Built products need to be constructed and can take up to 10 working days before being shipped.

For more information see the PHA-1x-R2 Product WEBPAGE

PHA-1 High IP3 Amplifier 0.07-2GHz

Brand: Mini-Kits

Product Code: PHA-1x-R2

Quantity In Stock: 2