GALI-84 Driver Amp +21dBm HF-4GHz

The GALI-84 driver amplifier is a simple wide band high +21db Gain amplifier for use between 100kHz and 4GHz. The amplifier is ideal as a transmitter driver, and has a +21dBm output power @ 1dB compression over the HF to 2GHz range. Only around 0dBm 1mW is required to drive the amplifier to full power. The basic Kit includes PC board and all on board components, including components to optimize the design to suit 3 frequency ranges from 100kHz to 4GHz.

Please refer to the GALI-84+ Data Sheet for further information. A 78M08 regulator is mounted under the board for +9 to 15vdc operation.

The Product image shows a fully constructed GALI-84 KIT product without SMA connectors. Please refer to the Options Tab for the descriptions of the various products available.

For Built Products see the Mini-Kits GALI-84-R2 Amplifier Modules

GALI-84 KIT is a Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction, and soldering of SMD components.

GALI-84 PCB Only includes the PC board and Kit construction notes.

Kits Do Not include connectors, miscellaneous hardware, or enclosure. For experienced constructors with some SMD construction experience.

Built Products have been replaced with the New Mini-Kits GALI-84-R2 Amplifier Modules

Specifications
Frequency Range:	0.1 to 250MHz, 100MHz to 2GHz, 330MHz to 4GHz versions available
Gain Typically:	22.6dB @ 500kHz, 23dB @ 1MHz, 25dB @ 50MHz, 24dB @ 500MHz, 22dB @ 1.2GHz, 18.5dB @ 2.4GHz
Noise Figure:	Typically < 4.6dB across the frequency range
OpIP3:	+37.5dBm @ 1GHz with ICC 100mA
Output Power:	+21.9dBm @ 100MHz, +21.5dBm @ 1.2GHz, +21dBm @ 2.4GHz
Operating Voltage:	+ 9 to 15vdc ( +12vdc @ 100mA Recommended )
Board Size:	45mm L x 32mm W x 15mm H