1.2GHz FM Video Transmitter

The 1.2GHz 23cm band FM Video transmitter Kit has a tune-able frequency range of 1020 to 1350MHz and produces high quality PAL video, or an optional component kit can be used for NTSC. The design has an on board Video Amplifier and Pre-emphasis, and uses a buffer amplifier to give up to +13dBm output. For Audio there is the option to use the EME158 Audio sub-carrier Kit that is available for either 5.5, 6.0, or 6.5MHz. The transmitter allows the connection of an external EME161 PLL Kit for frequency control, but can also be used free running as the VCO is stable enough to be used without a PLL.

The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.

Please Note: This product is only available as a Kit and is not available as a built and tested Module.

EME154-KIT is the Basic PAL Kit that includes the PC board, Instructions, all on board components, and header connectors. Requires complete construction, and soldering of some SMD components.

Please Note: This product is only available as a Kit and is no longer available as a built and tested Module.

EME154B-PAL Is the fully built and tested PAL board Kit with a SMA female.

EME154B-NTSC Is the fully built and tested NTSC board Kit with a SMA female.

NTSC KIT Is an additional component Kit that is required for the US.

Kits and built products Do Not include miscellaneous hardware, or an enclosure. Only built products include a SMA female connector.

Specifications
Frequency Range:	1020 to 1350MHz
Modulation:	FM Wideband 20MHz ( adjustable deviation )
Pre-emphasis:	PAL CCIR 405-1 ( Optional NTSC CCIR 405-1 )
RF Output:	+13dBm ( 20mW )
Video Input:	1v p-p into 75 ohms
Audio Input:	Optional sub-carrier 5.5, 6.0, or 6.5MHz
Operating Voltage:	+12 to 14vdc ( +12vdc @ 75mA )
PC Board Size:	65mm L x 49mm W x 20mm H