2m 8W Amplifier +39dBm

The VHF 2M 8 Watt RF Amplifier uses the Mitsubishi RA08H1317M module, and is suitable for many projects including homebrew Transceivers, Transverters, or APRS. The Kit is suitable for both linear SSB, AM and non linear FM modes, and includes an integrated 5th order Chebychev low pass filter on the board. For SSB use the module will produce around 4 Watts linear.

Please Note: For most applications using FM, You will require a Heat sink with at rating of at least 2.5 degrees C per watt. With short APRS transmissions a smaller heat sink can be used, with a realistic output of up to 5 Watts without overheating.

The Product image shows a fully constructed Module board without the optional Mitsubishi module. Please refer to the Options Tab for the descriptions of the various products available.

RA08H1317M KIT is a Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction and soldering of SMD components.

RA08H1317M-B is a fully constructed untested Module board. Not always available depends on workload.

RA08H1317M PCB Only includes the PC board and Kit construction notes.

Modules Option: These are the available modules that suit this Kit. Please select the type when ordering the Kit.

Kits and Module boards Do Not include the RF module, heat-sink, connectors or miscellaneous hardware. For advanced constructors Only.

Specifications
Frequency Range:	130 to 174MHz ( depends on module used )
Output Power:	+39dBm @ 1dB comp ( 8 watts )
Gain:	Typically 26dB @ 145MHz ( RA08H1317M )
Gain Bandwidth:	130 to 174MHz @ 3dB ( with on board 5th order Chebychev LPF )
Low Pass Filter::	5th order Chebychev, 2nd harmonic -65dBc 292MHz
Operating Voltage:	+7 to 12vdc ( +12.5vdc @ 1.2A Recommended ) +16vdc max
Board Size:	46mm L x 33mm W x10mm H ( without Heat-sink )