This Mitsubishi M Series Amplifier KIT3 is suitable for older M series H3 package that use +8vdc bias on Pin3. Suitable modules include the M67719.  The notes supplied with these Kits are generic and do not contain specific RF power levels or DC current for each specific module. It is expected that the constructor will be able to use the Mitsubishi data sheet for the module that they are using to work out the RF drive level requirement. 

The 2nd Harmonic from the M series M68719 modules are around -45dBc, so a Low Pass Filter is generally not required when used with a tuned 1200MHz Antenna.

Please Note: For most applications using FM, You will require a large Heat sink with at least a rating of 0.67 degrees C per watt. Mini-Kits suggests the use of a fan assisted Pentium P4 heat-sink that could possibly be found in surplus computer shops.

The Product image shows a fully constructed RA Series Module board without the Mitsubishi module.  Please refer to the Options Tab for the descriptions of the various products available.