The Mini-Kits EME201 M1 Series HF amplifier is ideal for use as a 10dB HF preamplifier, or low level TX driver with a 1dB bandwidth of 500kHz to 60MHz.  The amplifier uses a BFQ19 transistor which were designed for UHF distribution amplifiers, so are ideal for strong signal handling on the HF bands and produce a low 4.4dB noise figure at 12MHz..  The design incorporates PIN diode switching to allow RF bypassing of the amplifier for receive applications, and the same amplifier to be switched for use as a TX driver amplifier.  A common 16 PIn IDC connector is used for power and the various functions to control the onboard PIN diode switching.  The amplifier has been specifically designed as a building block for the Mini-Kits M1 Series HF Transceiver, but is also ideal to construct you own Receiver or Transceiver design.

For more detailed information on how this module Kit can be used, Please refer to the EME201 KIT webpage.

This Kit is ideal for all constructors mainly due to the use of conventional leaded components.  Only a very small number of surface mount components have been used due to component availability.  The basic Kit includes the PC board and all onboard components, but excludes the SMA connectors which can be purchased separately if required.

For the highest performance and reliability, Only high quality first grade components from large suppliers in the USA, or direct from major manufacturers are used in this Kit.

EME201-KIT is the Basic Kit that only includes the PC board, Instructions, and on board components. RF Connectors are Not included. Requires complete construction, and soldering of some SMD components.

EME201-PCB is the PC board, and Instructions only, No on board components or RF Connectors are Included. ( Not recommended as many components are not readily available )

3 x SMA33 connectors are recommended to use with inter-wiring of the module board Kits.

1 x IDC16S connector is recommended to use with inter-wiring of the module board Kits.

Kits Do Not include miscellaneous hardware, enclosure, or connectors.

Specifications
Bandwidth: 500kHz to 50MHz @ 1dB
Gain: 10dB +/- 0.5dB @ 12MHz
Noise Figure:
4.4dB @ 12MHz
Output 1dB Compression:
+14.5dBm @ 7MHz ( Bias 20mA )
Output IP2:
+60dBm @ 7MHz ( Bias 20mA )
Output IP3:
+30.5dBm @ 7MHz ( Bias 20mA )
Operating Voltage: +10 to 15vdc ( +12vdc @ 100mA )
Board Size: 73mm L x 42mm W x 20mm H

M1 Series 10dB HF Amplifier

  • Brand: Mini-Kits
  • Product Code: EME201-KIT
  • Quantity In Stock: 10
  • $29.95

  • Export: $27.23

Available Options

Accessories

Enter desired quantity before clicking Add to Cart button

SMA33 PCB Mount Wide 1.6mm

SMA33 PCB Mount Wide 1.6mm

$3.30 Export: $3.00

IDC16S 8x2 DIL 2.54mm

IDC16S 8x2 DIL 2.54mm

$0.66 Export: $0.60

  • Total:

  • Export Total:

Related Products

M1 Series HF Mixer Amplifier

M1 Series HF Mixer Amplifier

Priced from

$39.95 Export: $36.32

M1 Series 9MHz Crystal Filter

M1 Series 9MHz Crystal Filter

Priced from

$44.50 Export: $40.45

M1 Series 9MHz BFO Demodulator

M1 Series 9MHz BFO Demodulator

Priced from

$49.95 Export: $45.41

M1 Series Preselector Bandpass Filters

M1 Series Preselector Bandpass Filters

Priced from

$39.95 Export: $36.32

M1 Series 500mW Audio Amplifier

M1 Series 500mW Audio Amplifier

Priced from

$39.95 Export: $36.32

M1 Series 9MHz IF AGC Amplifer

M1 Series 9MHz IF AGC Amplifer

Priced from

$74.90 Export: $68.09

M1 Series Transmit Modulator

M1 Series Transmit Modulator

Priced from

$47.50 Export: $43.18

M1 Series 16W HF MosFET Amplifier Rev3

M1 Series 16W HF MosFET Amplifier Rev3

Priced from

$69.95 Export: $63.59

M1 Series Low Pass Filters

M1 Series Low Pass Filters

Priced from

$43.95 Export: $39.95

M1 Series 9MHz IF Noise Blanker

M1 Series 9MHz IF Noise Blanker

Priced from

$55.00 Export: $50.00