PGA-103-434M-R2 Amplifier

The PGA-103-434-R2 is a high dynamic range low noise receive only wide-band amplifier that is specifically designed for 433MHz LoRa. The design uses an AFS434S3 SAW filter that has a flat 4MHz @ 1dB pass band centered at 434MHz. The amplifier incorporates an on board Bias Tee so that power can be fed up the coaxial cable if required to power the amplifier. Please refer to the PGA-103+ Data Sheet for further information.

This Product is only available as a built and tested module or in an enclosure and is not available as a Kit. Products include a 2.1mm DC power cable. Please refer to the Options Tab for the descriptions of the various products available.

Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in a few days.

PGA103-434M-R2-B Is a fully constructed and tested 434MHz LoRa PC board Amplifier with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable

PGA103-434M-R2-ENC Is a fully constructed 434MHz LoRa amplifier in a extruded aluminium enclosure with female SMA, and 2.1mm DC socket. Includes a 2.1mm DC cable

Specifications
Frequency Range:	CF 434MHz ( BW +/-2MHz @ 1dB )
Band Rejection:	Refer to the AFS434S3 Data Sheet
Gain Typically:	17.5dB +/-1dB @ 434MHz
Noise Figure:	1dB @ 434MHz, ( Typically <0.7dB )
Operating Voltage:	+ 7 to 15vdc ( +12vdc @ 90mA Recommended )
Board Size:	37mm L x 41mm W x 15mm H ( Does not inc SMA length )
Enclosure Size:	43mm L x 44mm W x 23.3mm H ( Does not inc SMA length )

Kits are available to ship to most countries. Built Products are only available for Australia and New Zealand Only, and are Not available for Export to other countries.

Please Note: Built products need to be constructed and can take up to 10 working days before being shipped.

For more information see the PGA103-434-R2 Product WEBPAGE

PGA-103-434M Low Noise LoRa RX Amplifier 434MHz

Brand: Mini-Kits

Product Code: PGA103-434M-R2

Quantity In Stock: 2