The EME168 Series 2M / 4M / 2M Band RX/TX bias tee Kit is suitable for powering either the Mini-Kits 6M 50MHz band EME220-6M or 2M 144MHz band EME220-2M Pre-amplifiers via the coaxial cable. The design has been optimized to cover the complete 30MHz to 200MHz frequency range for the lowest loss and return loss. The board is fitted with PTC protection to safeguard against any short circuits on the RF/DC output, and over voltage. Transceivers with an accessory connector usually have a positive voltage, or grounded logic TX output that can be easily connected to the Bias Tee to control the switching. The Bias Tee is designed to handle up to 500 Watts CW. For more information see the 2M band Application Block Diagram.
Please select the connector types that you require for both the RF connection to the receiver, and the RF/DC connection that goes to the amplifier.The Product image shows a fully constructed Kit product. Please refer to the Options Tab for the descriptions of the various products available.
Please Note: Built products usually need to be constructed and can take up to 2 weeks to ship depending on work load, but are normally shipped in few days.
EME168-6-2-KIT is the complete VHF Kit that includes the PC board, instructions, all on board components, and Hammond 1590A enclosure. Requires complete construction, and soldering of some SMD components.
EME168-6-2-B Is a fully built and tested product in a Hammond 1590A enclosure.
RF Connector Option ( To Preamplifier ) is the RF connector that connects via a coaxial cable to the Pre-amplifier. This option must be selected and is not optional.
RF Connector Option ( To Transceiver ) is the connector connects via a coaxial cable to the Transceiver. This option must be selected and is not optional.
The RF and RF/DC connectors must be selected when ordering either the
Kit or built product, and are available in BNC, N, and F types.
| Specifications | |
|---|---|
| Frequency Range: | 40 to 200MHz ( 6M, 4M and 2M bands ) |
| Insertion Loss: | <0.2dB from 20 to 200MHz |
| Return Loss: | >30dB from 40 to 200MHz |
| RF Power: | 500 Watts CW |
| Operating Voltage: | +12 to 15vdc ( +15vdc @ 300mA maximum ) |
| Product Size: | 92mm L x 38mm W x 50mm H |
Kits are available to ship to most countries. Built Products are only available for Australia and New Zealand Only, and are Not available for Export to other countries.
Please Note: Built products need to be constructed and can take up to 10 working days before being shipped.
For more information see the EME168 KIT WEBPAGE
Please refer to the 2M Application Block Diagram on how this Kit is used .
6M / 4M / 2M RX/TX Bias Tee
- Brand: Mini-Kits
- Product Code: EME168-6-2 KIT
- Quantity In Stock: 2
-
$57.95
- Export: $52.68
Available Options
Related Products
