GALI-39 Amplifier +22dB DC-4GHz

The GALI-39 amplifier is ideal as simple wide band high +22db Gain amplifier for use between 100kHz and 4GHz. The amplifier is suitable as a low noise receiver or transmitter gain block, and has +22dB gain and < 2.5dB Noise Figure over the HF to 2GHz range when optimized. Please refer to the GALI-39+ Data Sheet for further information. A 78M05 regulator is mounted under the board for +7 to 15vdc operation.

The Product image shows a fully constructed GALI-39 KIT product without SMA connectors. Please refer to the Options Tab for the descriptions of the various products available.

For Built Products see the Mini-Kits GALI-39-R2 Amplifier Modules

GALI-39 KIT is a Basic Kit that includes the PC board, Instructions, and all on board components. Requires complete construction, and soldering of SMD components.

GALI-39 PCB Only includes the PC board and Kit construction notes.

Kits Do Not include connectors, miscellaneous hardware, or enclosure. For experienced constructors with some SMD construction experience.

Built Products have been replaced with the New Mini-Kits GALI-39-R2 Amplifier Modules

Specifications
Frequency Range:	0.1 to 250MHz, 100MHz to 2GHz, 330MHz to 4GHz versions available
Gain Typically:	22dB from 1 to 2GHz
Noise Figure:	2.1dB @ 50MHz, 2.34dB @ 500MHz, 2.24dB @ 1GHz, 2.32dB @ 2GHz
OpIP3:	+22.9dBm @ 2GHz with ICC 35mA
Output Power:	+12dBm +/- 1dB @ 1GHz +3.5vdc @ 35mA )
Operating Voltage:	+ 7 to 15vdc ( +12vdc @ 350mA Recommended )
Board Size:	45mm L x 32mm W x 15mm H