The Mini-Kits EME203 9MHz Crystal Filter Kits are part of a building block to construct a high performance M1 Series HF Transceiver. Filters are available for either a 5 pole or 8 pole crystal filter, and incorporates SPDT switches to either isolate the filter, or switch it in for either the RX or TX signal paths. Multiple filter boards can be stacked using extended header connectors, and controlled through a single 16 Pin IDC header connector, making it easier to interface to logic circuitry.  The design incorporates Analog SPDT FET switching to allow the filter to be used in both the receiver and transmitter circuits.  The filters have been specifically designed as a building block for the Mini-Kits M1 Series HF Transceiver, but are also ideal to construct you own Receiver or Transceiver design.

For more detailed information on how this module Kit can be used, Please refer to the EME203 Kit webpage. Filter Kits are supplied with matched sets of crystals to within 20Hz for the SSB or CW and 50Hz for the AM filters.

This Kit is ideal for most constructors, but does contain a number of surface mount components which have been used to reduce the cost of the Kits.  The basic Kit includes the PC board and all onboard components, but excludes the SMA connectors which can be purchased separately if required.

For the highest performance and reliability, Only high quality first grade components from large suppliers in the USA, or direct from major manufacturers are used in this Kit.

9M-8-2.5k-KIT is the Basic 9MHz 8 Pole 2.5kHz @ 6dB Filter Kit that includes the PC board, Instructions, all on board components, stackable headers, and 8x matched crystals. Requires complete construction, and soldering of some SMD components.

9M-5-6.0k KIT is the Basic 9MHz 5 Pole 6kHz @ 6dB Filter Kit that includes the PC board, Instructions, all on board components, stackable headers, and 5x matched crystals.
Requires complete construction, and soldering of some SMD components.

9M-8-0.5k-KIT is the Basic 9MHz 8 Pole 0.5kHz @ 6dB Filter Kit that includes the PC board, Instructions, all on board components, stackable headers, and 8x matched crystals. Requires complete construction, and soldering of some SMD components

EME203-PCB is the PC board and Instructions Only, ( Not recommended as the components are not readily available )

4 x SMA33 connectors are recommended to use with inter wiring of the module board Kits. Only required on the first filter board as additional boards are stacked using stackable headers.

1 x IDC16S connector is recommended to use with inter wiring of the module board Kits. Only required on the first filter board as additional boards are stacked using stackable headers

4 x SPA-M3x12 used to stack filter boards and match the height of the stackable headers.

Kits Do Not include miscellaneous hardware, enclosure, or RF connectors.

Specifications
Frequency:
9MHz ( varies with crystals supplied and also bandwidth )
Bandwidth: SSB 2.5kHz @ 6dB, CW 0.5kHz @ 6dB, AM 6kHz @ 6dB  Test Data
Loss: 8 Pole 2.5kHz 4.5dB, 8 Pole 0.5kHz 11.5dB, 5 Pole 6kHz 3dB
Impedance: 50ohms input and output
Operating Voltage: +10 to 15vdc ( +12vdc @ 10mA )
Board Size: 73mm L x 42mm W x 20mm H

M1 Series 9MHz Crystal Filter

  • Brand: Mini-Kits
  • Product Code: EME203-KIT
  • Quantity In Stock: 10
  • $44.50

  • Export: $40.45

  • Discount Pricing

  • 10 pcs or more $40.05

Available Options

Accessories

Enter desired quantity before clicking Add to Cart button

IDC16S 8x2 DIL 2.54mm

IDC16S 8x2 DIL 2.54mm

$0.66 Export: $0.60

SMA37 PCB Mount Narrow 1.6mm

SMA37 PCB Mount Narrow 1.6mm

$3.30 Export: $3.00

  • Total:

  • Export Total:

Related Products

M1 Series 10dB HF Amplifier

M1 Series 10dB HF Amplifier

Priced from

$29.95 Export: $27.23

M1 Series HF Mixer Amplifier

M1 Series HF Mixer Amplifier

Priced from

$39.95 Export: $36.32

M1 Series 9MHz BFO Demodulator

M1 Series 9MHz BFO Demodulator

Priced from

$49.95 Export: $45.41

M1 Series 500mW Audio Amplifier

M1 Series 500mW Audio Amplifier

Priced from

$39.95 Export: $36.32

M1 Series 9MHz IF AGC Amplifer

M1 Series 9MHz IF AGC Amplifer

Priced from

$74.90 Export: $68.09

M1 Series Transmit Modulator

M1 Series Transmit Modulator

Priced from

$47.50 Export: $43.18

M1 Series 16W HF MosFET Amplifier Rev3

M1 Series 16W HF MosFET Amplifier Rev3

Priced from

$69.95 Export: $63.59

M1 Series HF Attenuator 9MHz Trap

M1 Series HF Attenuator 9MHz Trap

Priced from

$37.95 Export: $34.50

M1 Series 9MHz IF Noise Blanker

M1 Series 9MHz IF Noise Blanker

Priced from

$55.00 Export: $50.00