This Mitsubishi M Series Amplifier KIT1 is suitable for older M series H3 package that use +9vdc bias on Pin3. Suitable modules include the M57713, M57727, M57735, M57762, and M67712.  The notes supplied with these Kits are generic and do not contain specific RF power levels or DC current for each specific module. It is expected that the constructor will be able to use the Mitsubishi data sheet for the module that they are using to work out the RF drive level requirement. 

The 2nd Harmonic from the M series modules are around -25dBc, so you will require a suitable Low Pass Filter like the Mini-Kits LPF7-54M / 170M KIT to comply with local country regulations.

Please Note: For most applications using FM, You will require a large Heat sink with at least a rating of 0.67 degrees C per watt. Mini-Kits suggests the use of a fan assisted Pentium P4 heat-sink that could possibly be found in surplus computer shops.

The Product image shows a fully constructed RA Series Module board without the Mitsubishi module.  Please refer to the Options Tab for the descriptions of the various products available.